VOLKTEK

Factory

アプリケーションの概要考慮事項 Volktekのメリットアプリケーションダイアグラム

アプリケーションの概要

Factory automation networking systems require a combination of security, monitoring and measurement to centrally manage the equipment and factory employees in the control room. The operational data is sent through a PLC where engineers are able to analyzye equpment performance, remotely control the devices and detect failures through the SCADA system.

考慮事項

Ruggedized metal housing with IP30 certification for mechanical stress, humidity, dirt, dust, shock and vibration with temperature range of -40°C~75°C.
Automatically detect hardware or system malfunctions and send alerts vial email.
Redundant ring topology with millisecond scale network recovery for maximum uptime real-time video and data transmission.
Sutiable for mission-critical production and process automation and can be integrated into any large-scale distributed SCADA monitoring system.

Volktekのメリット

	Feature		Benefit
Reliability	Redundant Power	Remains On During Power Failure	1) Built-in surge protection, dual power sources, and battery back-up 2) Ensure stable device operations for 24/7 network reliability.
Availability	Xpress-Ring	Fast Network Recovery	1) Rapidly react to physical link failure and recover immediately 2) Provide an alternate pathy link to support continuous transmission.
Performance	Quality of Service (QoS)	Define the Critical Networks	Networks typically operate on a best-effort delivery basis, which means that all traffic transmitting from ports has equal priority and chance of being delivered in a timely manner. When congestion occurs, the same traffic has an equal chance of being dropped. When configuring the QoS feature, specific networks can be prioritized, optimizing the network performance and bandwidth utilization.
Security	802.1x RADIUS / TACACS+	Secure the Network by Authenticating the Users	Allows the network administrator to specify a whitelist of allowed MAC addresses, allowing only those devices to connect to the network. It also limits the number of devices connected to a single downlink port known as Dynamic Assignment.
Security	e-mail Alarm	Triggered Events Alert Via Email	1) Notify the administrator if real-time problems occur such as firmware or configuration changes, device status, link connectivity status, etc. 2) Help administrators to quickly identify, isolate and resolve network issues.
Management	Simple Network Management Protocol (SNMP) + TRAP	Monitor Your Network From a Single Location	SNMP allows large networks with thousands of nodes to be monitored from a management host. The data is used for collecting and configuring information for devices such as servers, printers, hubs, switches, and routers. Volktek's managed switches provide management of SNMP traps or alert messages sent from a remote SNMP-enabled device to a central SNMP server.
Management	PoE ON / OFF + PD Alive Check	Intelligent PoE+ for Powered Devices	PoE switches can enable or disable the power supply to the powered devices. The powered ports can send keep-alive checking packets to the devices to increase system reliability.

アプリケーションダイアグラム