Indoor Surveillance
Shopping Malls

Application Overview

To protect the shoppers and staff and to prevent theft, a robust security system is needed for both indoor facilties and outdoor parking lots. A secure, high-speed surveillance system is needed to run with 24/7 operation with NVR and back-up power to keep the system up during power outages.

Key Considerations

  • PoE+ functionality eliminates the need for powered device (PD) power source while providing Alive-check features for easy maintenance and remote management.
  • Port prioritization to provide uninterrupted service for critical systems.
  • Remote power monitoring capacity with easy-to-use GUI.
  • Gigabit bandwidth with port density up to 24 ports.

Key Volktek Benefits

  Feature Benefit
Reliability Redundant Power Remains On During Power Failure Redundant power sources (15VDC or battery back-up) keep the devices operational during power failures.
Reliability Multi-rate Fiber Port Auto Uplink and Downlink Rate Negotiation 1) Check the speed of the network and set the uplink/downlink speeds 2) Optimize their performance in the data transmission.
Availability Ring Redundancy Remains Connected If Active Link Fails

1) Rapidly react to physical link failure and recover immediately 

2) Provide an alternate pathy link to support continuous transmission.

Performance Quality of Service (QoS) Define the Critical Networks Specific networks can be prioritized, optimizing the network performance and bandwidth utilization.
Security Device Locking Last Mile of Protection By enabling the Device Lock feature, the switch will not function in any network other than its configured network.
Management Link Layer Discovery Protocol (LLDP) Access Device and Network Information LLDP autodiscovery allows a network device to disclose its identity and capabilities on the LAN.  Device information such as port ID and description, system name, device capability, IP/MAC address, etc., is collected from the neighboring devices and can be queried using SNMP.
Management PoE ON / OFF + PD Alive Check Intelligent PoE+ for Powered Devices PoE switches can enable or disable the power supply to the powered devices.  The powered ports can send keep-alive checking packets to the devices to increase system reliability.

Application Diagram

PRODUCT

COMPARE(0)

INQUIRE

We use cookies to provide the services and features offered on our website, and to improve our user experience. By using this website, you consent to the use of cookies.

OK